M4A3-128/64-10VI
| Parameters | |
|---|---|
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-128 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 5000 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 224 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
M4A3-128/64-10VI Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].There are 64 I/Os on the board.It is programmed that device terminations will be 100 .Its terminal position is QUAD.The power source is powered by 3.3Vvolts.This part is in the family [0].Trayshould be used to package the chip.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.Mount the chip by Surface Mount.The FPGA belongs to the ispMACH? 4A series.It is equipped with 100 pin count.When using this device, YEScan also be found.In accordance with the [0], its related parts are listed.5000gates are devices that serve as building blocks for digital circuits.If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is adopted to store data in [0].This device is mounted by Surface Mount.The device has a pinout of [0].In this case, the maximum supply voltage is 3.6V.Despite its minimal supply voltage of [0], it is capable of operating.A programmable I/O count of 224 has been recorded.It is recommended that the maximum frequency be less than 100MHz.Input signals are detected using 2dedicated inputs.
M4A3-128/64-10VI Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
100 pins
M4A3-128/64-10VI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-128/64-10VI CPLDs applications.
- Address decoders
- Handheld digital devices
- USB Bus
- Boolean function generators
- Voltage level translation
- D/T registers and latches
- I/O PORTS (MCU MODULE)
- Protection relays
- Digital systems
- Digital designs
