M4A3-128/64-10VNC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M4A3-128 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 5000 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 224 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A3-128/64-10VNC Overview
A mobile phone network consists of 128macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).A 100-LQFP package contains the item.There are 64 I/Os on the board.There is a 100terminations set on devices.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.An electrical supply voltage of 3.3V is used to power it.There is a part in the family [0].As a result, it is packaged as Tray.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.It is recommended that Surface Mountholds the chip in place.It belongs to the ispMACH? 4Aseries of FPGAs.It has 100pins programmed.This device can also display [0].The M4A3-128can be used to identify its related parts.It is possible to construct digital circuits using 5000gates, which are devices that serve as building blocks.High efficiency requires a voltage supply of [0].Data storage is performed using [0].In this case, Surface Mountis used to mount the electronic component.There are 100 pins on the device.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.The minimal supply voltage is 3V.Currently, there are 224 Programmable I/Os available.It is important to make sure that the maximum frequency is less than 100MHz.The status of input signals is determined by 2dedicated inputs.
M4A3-128/64-10VNC Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
M4A3-128/64-10VNC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-128/64-10VNC CPLDs applications.
- Custom shift registers
- I/O expansion
- D/T registers and latches
- Configurable Addressing of I/O Boards
- Software-driven hardware configuration
- Wide Vin Industrial low power SMPS
- Parity generators
- Complex programmable logic devices
- Pattern recognition
- Page register
