Parameters |
Mounting Type |
Surface Mount |
Package / Case |
100-LFBGA |
Surface Mount |
YES |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tray |
Published |
1998 |
Series |
ispMACH® 4A |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
100 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn63Pb37) |
Additional Feature |
YES |
HTS Code |
8542.39.00.01 |
Subcategory |
Programmable Logic Devices |
Technology |
CMOS |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
240 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.8mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
M4A3-128 |
Pin Count |
100 |
JESD-30 Code |
S-PBGA-B100 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Programmable Type |
In System Programmable |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
3V |
Number of I/O |
64 |
Memory Type |
EEPROM |
Propagation Delay |
7.5 ns |
Number of Gates |
5000 |
Max Frequency |
125MHz |
Number of Programmable I/O |
400 |
Output Function |
MACROCELL |
Number of Macro Cells |
128 |
JTAG BST |
YES |
Number of Dedicated Inputs |
2 |
Voltage Supply - Internal |
3V~3.6V |
Delay Time tpd(1) Max |
7.5ns |
Height Seated (Max) |
1.5mm |
Length |
10mm |
Width |
10mm |
RoHS Status |
Non-RoHS Compliant |
M4A3-128/64-7CAC Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The product is contained in a 100-LFBGA package.As a result, it has 64 I/O ports programmed.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.There is a BOTTOMterminal position on the electrical part in question.A voltage of 3.3V is used as the power supply for this device.This part is in the family [0].It is recommended that the chip be packaged by Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.Chips should be mounted by Surface Mount.As part of the ispMACH? 4Aseries, it is a type of FPGA.Chips are programmed with 100 pins.When using this device, YESis also available.The M4A3-128can be used to identify its related parts.In digital circuits, there are 5000gates, which act as a basic building block.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].This device operates at a voltage of 3.6V when the maximum supply voltage is applied.Initially, it requires a voltage of 3Vas the minimum supply voltage.A total of 400programmable I/Os are available.It is recommended that the maximal frequency be lower than 125MHz.A total of 2dedicated inputs are available for detecting the status of input signals.
M4A3-128/64-7CAC Features
100-LFBGA package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
M4A3-128/64-7CAC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-128/64-7CAC CPLDs applications.
- DDC INTERFACE
- Voltage level translation
- Power up sequencing
- Address decoding
- Bootloaders for FPGAs
- STANDARD SERIAL INTERFACE UART
- Reset swapping
- ON-CHIP OSCILLATOR CIRCUIT
- Battery operated portable devices
- Discrete logic functions