M4A3-128/64-7VNI
| Parameters | |
|---|---|
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M4A3-128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 5000 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 400 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
M4A3-128/64-7VNI Overview
128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is embedded in the 100-LQFP package.This device has 64 I/O ports programmed into it.100terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.A voltage of 3.3Vprovides power to the device.It is a part of family [0].Package the chip by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Ensure that the chip is mounted by Surface Mount.FPGAs belonging to the ispMACH? 4Aseries contain this type of chip.The chip is programmed with 100 pins.When using this device, YEScan also be found.According to the M4A3-128, its related parts can be found.As a building block for digital circuits, there are 5000gates.Optimal efficiency requires a supply voltage of [0].In this case, EEPROMwill be used to store the data.A Surface Mountis mounted on this electronic component.A total of 100pins are provided on this board.In this case, the maximum supply voltage is 3.6V.Normally, it operates with a voltage of 3VV as its minimum supply voltage.In total, there are 400programmable I/Os.The maximal frequency should be lower than 125MHz.The status of input signals is determined by 2dedicated inputs.
M4A3-128/64-7VNI Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
100 pins
M4A3-128/64-7VNI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-128/64-7VNI CPLDs applications.
- Bootloaders for FPGAs
- Interface bridging
- STANDARD SERIAL INTERFACE UART
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Storage Cards and Storage Racks
- Dedicated input registers
- Portable digital devices
- White goods (Washing, Cold, Aircon ,...)
- Digital multiplexers
- DMA control
