M4A3-192/96-10FAI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-BGA |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Base Part Number | M4A3-192 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 96 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 7500 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 224 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 16 |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 2.1mm |
| Length | 13mm |
| Width | 13mm |
| RoHS Status | Non-RoHS Compliant |
M4A3-192/96-10FAI Overview
Currently, there are 192 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The product is contained in a 144-BGA package.In this case, there are 96 I/Os programmed.144terminations are programmed into the device.There is a BOTTOMterminal position on the electrical part in question.There is 3.3V voltage supply for this device.This part is in the family [0].Trayshould be used to package the chip.The operating temperature of the machine is -40°C~85°C TA to ensure its reliability.It is recommended to mount the chip by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4A series.Chips are programmed with 144 pins.The device can also be used to find [0].You can find its related parts in the [0].There are 7500 gates, which are devices that acts as a building block for digital circuits. If high efficiency is to be achieved, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.A Surface Mountis mounted on this electronic component.There are 144pins on it.A maximum supply voltage of 3.6Vis used in its operation.It is powered by 3Vas its minimum supply voltage.A total of 224 Programmable I/Os are available.It is recommended that the maximal frequency be lower than 100MHz.There are 16 dedicated inputs used to detect the status of input signals.
M4A3-192/96-10FAI Features
144-BGA package
96 I/Os
The operating temperature of -40°C~85°C TA
144 pin count
144 pins
M4A3-192/96-10FAI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-192/96-10FAI CPLDs applications.
- Preset swapping
- Software Configuration of Add-In Boards
- PLC analog input modules
- ToR/Aggregation/Core Switch and Router
- ROM patching
- Auxiliary Power Supply Isolated and Non-isolated
- USB Bus
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Timing control
- Battery operated portable devices
