M4A3-192/96-10VNC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M4A3-192 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 96 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 7500 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 400 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 16 |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
M4A3-192/96-10VNC Overview
192 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.A 144-LQFP package contains the item.As you can see, this device has 96 I/O ports programmed into it.There are 144 terminations programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The device is powered by a voltage of 3.3V volts.This part is in the family [0].Package the chip by Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.Mount the chip by Surface Mount.The ispMACH? 4Aseries comprises this type of FPGA.The chip is programmed with 144 pins.It is also possible to find YESwhen using this device.In accordance with the [0], its related parts are listed.For digital circuits, there are 7500gates. These devices serve as building blocks.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].The electronic component is mounted by Surface Mount.The device has a pinout of [0].A maximum voltage of 3.6Vis required for operation.It is powered by 3Vas its minimum supply voltage.In total, there are 400programmable I/Os.It is recommended that the maximal frequency be lower than 100MHz.Input signals are detected by 16dedicated inputs.
M4A3-192/96-10VNC Features
144-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
144 pin count
144 pins
M4A3-192/96-10VNC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-192/96-10VNC CPLDs applications.
- Pattern recognition
- Discrete logic functions
- Parity generators
- STANDARD SERIAL INTERFACE UART
- Software Configuration of Add-In Boards
- Interface bridging
- Reset swapping
- Bootloaders for FPGAs
- Multiple Clock Source Selection
- Page register
