M4A3-192/96-7VNC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M4A3-192 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 96 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 7500 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 97 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 16 |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | ROHS3 Compliant |
M4A3-192/96-7VNC Overview
In the mobile phone network, there are 192macro cells, which are cells with high-power antennas and towers.There is a 144-LQFP package containing it.It is programmed with 96 I/Os.There are 144 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.There is a QUADterminal position on the electrical part in question.A voltage of 3.3Vprovides power to the device.This part is part of the family [0].It is recommended that the chip be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].Chips should be mounted by Surface Mount.The ispMACH? 4Aseries FPGA is one of these types.It is programmed with 144 pins.This device also displays [0].There are related parts in [0].In digital circuits, there are 7500gates, which act as a basic building block.For high efficiency, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].It is mounted by Surface Mount.A total of 144pins are provided on this board.In this case, the maximum supply voltage is 3.6V.Initially, it requires a voltage of 3Vas the minimum supply voltage.A programmable I/O count of 97 has been recorded.Ideally, the maximal frequency should be lower than 125MHz Hz.The status of input signals is detected by 16dedicated inputs.
M4A3-192/96-7VNC Features
144-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
144 pin count
144 pins
M4A3-192/96-7VNC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-192/96-7VNC CPLDs applications.
- STANDARD SERIAL INTERFACE UART
- Protection relays
- Multiple Clock Source Selection
- Digital multiplexers
- DDC INTERFACE
- USB Bus
- LED Lighting systems
- Code converters
- Parity generators
- Address decoding
