banner_page

M4A3-256/128-10FAC

1mm PMIC ispMACH? 4A Series M4A3-256 3.3V 256-BGA


  • Manufacturer: Lattice Semiconductor Corporation
  • Nocochips NO: 477-M4A3-256/128-10FAC
  • Package: 256-BGA
  • Datasheet: PDF
  • Stock: 640
  • Description: 1mm PMIC ispMACH? 4A Series M4A3-256 3.3V 256-BGA (Kg)

Details

Tags

Parameters
Supply Voltage 3.3V
Terminal Pitch 1mm
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number M4A3-256
Pin Count 256
Qualification Status Not Qualified
Operating Supply Voltage 3.3V
Programmable Type In System Programmable
Max Supply Voltage 3.6V
Min Supply Voltage 3V
Number of I/O 128
Memory Type EEPROM
Propagation Delay 10 ns
Number of Gates 10000
Max Frequency 100MHz
Number of Programmable I/O 67
Output Function MACROCELL
Number of Macro Cells 256
JTAG BST YES
Number of Dedicated Inputs 14
Voltage Supply - Internal 3V~3.6V
Height Seated (Max) 2.1mm
Length 17mm
Width 17mm
RoHS Status Non-RoHS Compliant
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 256-BGA
Operating Temperature 0°C~70°C TA
Packaging Tray
Published 1998
Series ispMACH® 4A
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 256
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn63Pb37)
Additional Feature YES
HTS Code 8542.39.00.01
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 225

M4A3-256/128-10FAC Overview


There are 256 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is embedded in the 256-BGA package.The device is programmed with 128 I/Os.Devices are programmed with terminations of [0].There is a BOTTOMterminal position on the electrical part in question.A voltage of 3.3V is used as the power supply for this device.There is a part in the family [0].Trayis the packaging method.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.Chips should be mounted by Surface Mount.FPGAs belonging to the ispMACH? 4Aseries contain this type of chip.The chip is programmed with 256 pins.It is also characterized by YES.The M4A3-256can be used to identify its related parts.The 10000gates serve as building blocks for digital circuits.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].The electronic component is mounted by Surface Mount.In this case, the maximum supply voltage is 3.6V.In order for it to operate, a supply voltage of 3Vis required.A total of 67 Programmable I/Os are available.The maximum frequency should not exceed 100MHz.The status of input signals is determined by 14dedicated inputs.

M4A3-256/128-10FAC Features


256-BGA package
128 I/Os
The operating temperature of 0°C~70°C TA
256 pin count

M4A3-256/128-10FAC Applications


There are a lot of Lattice Semiconductor Corporation M4A3-256/128-10FAC CPLDs applications.

  • ANALOG-TO-DIGITAL CONVERTOR (ADC)
  • DMA control
  • STANDARD SERIAL INTERFACE UART
  • Programmable power management
  • Digital systems
  • Wide Vin Industrial low power SMPS
  • Auxiliary Power Supply Isolated and Non-isolated
  • High speed graphics processing
  • Parity generators
  • I2C BUS INTERFACE

Write a review

Note: HTML is not translated!
    Bad           Good