M4A3-256/128-10FAI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 128 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 10000 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 97 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
M4A3-256/128-10FAI Overview
There are 256 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].It is equipped with 128I/O ports.It is programmed that device terminations will be 256 .This electrical component has a terminal position of 0.A voltage of 3.3Vprovides power to the device.There is a part included in Programmable Logic Devices.It is recommended to package the chip by Tray.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.It is recommended that Surface Mountholds the chip in place.In FPGA terms, it is a type of ispMACH? 4Aseries FPGA.There are 256 pins on the chip.If this device is used, you will also be able to find [0].According to the M4A3-256, its related parts can be found.In digital circuits, 10000gates serve as building blocks.In order to maintain high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].This device operates at a voltage of 3.6V when the maximum supply voltage is applied.A minimum supply voltage of 3V is required for it to operate.There are 97 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It is recommended that the maximum frequency be less than 100MHz.There are 14 dedicated inputs used to detect the status of input signals.
M4A3-256/128-10FAI Features
256-BGA package
128 I/Os
The operating temperature of -40°C~85°C TA
256 pin count
M4A3-256/128-10FAI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-256/128-10FAI CPLDs applications.
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Power Meter SMPS
- Bootloaders for FPGAs
- Parity generators
- Page register
- High speed graphics processing
- Multiple Clock Source Selection
- I/O expansion
- Software-driven hardware configuration
- Portable digital devices
