Parameters |
JESD-609 Code |
e1 |
Pbfree Code |
yes |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
256 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Additional Feature |
YES |
HTS Code |
8542.39.00.01 |
Subcategory |
Programmable Logic Devices |
Technology |
CMOS |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
250 |
Supply Voltage |
3.3V |
Terminal Pitch |
1mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
M4A3-256 |
Pin Count |
256 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Programmable Type |
In System Programmable |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
3V |
Number of I/O |
128 |
Memory Type |
EEPROM |
Propagation Delay |
10 ns |
Number of Gates |
10000 |
Max Frequency |
100MHz |
Number of Programmable I/O |
160 |
Output Function |
MACROCELL |
Number of Macro Cells |
256 |
JTAG BST |
YES |
Number of Dedicated Inputs |
14 |
Voltage Supply - Internal |
3V~3.6V |
Delay Time tpd(1) Max |
10ns |
Height Seated (Max) |
2.1mm |
Length |
17mm |
Width |
17mm |
RoHS Status |
ROHS3 Compliant |
Mounting Type |
Surface Mount |
Package / Case |
256-BGA |
Surface Mount |
YES |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tray |
Published |
1998 |
Series |
ispMACH® 4A |
M4A3-256/128-10FANI Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).A 256-BGA package contains the item.There are 128 I/Os on the board.256terminations are programmed into the device.This electrical component has a terminal position of 0.A voltage of 3.3V is used as the power supply for this device.There is a part in the family [0].It is recommended that the chip be packaged by Tray.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.Mount the chip by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4A series.The chip is programmed with 256 pins.Additionally, this device is capable of displaying [0].The M4A3-256indicates that its related parts can be found.A digital circuit is built using 10000gates.If high efficiency is desired, the supply voltage should be kept at [0].It is recommended to store data in [0].There is a maximum supply voltage of 3.6V.A minimum supply voltage of 3V is required for this device to operate.A programmable I/O count of 160 has been recorded.Ideally, the maximal frequency should be lower than 100MHz Hz.Input signals are detected using 14dedicated inputs.
M4A3-256/128-10FANI Features
256-BGA package
128 I/Os
The operating temperature of -40°C~85°C TA
256 pin count
M4A3-256/128-10FANI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-256/128-10FANI CPLDs applications.
- ToR/Aggregation/Core Switch and Router
- Digital designs
- Handheld digital devices
- Digital multiplexers
- Cross-Matrix Switch
- Synchronous or asynchronous mode
- State machine control
- Wide Vin Industrial low power SMPS
- Configurable Addressing of I/O Boards
- Custom state machines