M4A3-256/128-12FAI
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 128 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Number of Gates | 10000 |
| Max Frequency | 83.3MHz |
| Number of Programmable I/O | 67 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 12ns |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
M4A3-256/128-12FAI Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The product is contained in a 256-BGA package.It is equipped with 128I/O ports.It is programmed to terminate devices at [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.There is 3.3V voltage supply for this device.The part is included in Programmable Logic Devices.The chip should be packaged by Tray.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4A series.A chip with 256pins is programmed.If this device is used, you will also be able to find [0].There are related parts in [0].For digital circuits, there are 10000gates. These devices serve as building blocks.In order to maintain high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.A maximum supply voltage of 3.6Vis used in its operation.Initially, it requires a voltage of 3Vas the minimum supply voltage.Currently, there are 67 Programmable I/Os available.There should be a lower maximum frequency than 83.3MHz.The status of input signals is determined by 14dedicated inputs.
M4A3-256/128-12FAI Features
256-BGA package
128 I/Os
The operating temperature of -40°C~85°C TA
256 pin count
M4A3-256/128-12FAI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-256/128-12FAI CPLDs applications.
- Digital multiplexers
- High speed graphics processing
- POWER-SAVING MODES
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- D/T registers and latches
- Digital designs
- ROM patching
- I/O expansion
- I/O PORTS (MCU MODULE)
- Digital systems
