M4A3-256/128-12FANI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M4A3-256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 128 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Number of Gates | 10000 |
| Max Frequency | 83.3MHz |
| Number of Programmable I/O | 67 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
M4A3-256/128-12FANI Overview
The mobile phone network has 256 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is embedded in the 256-BGA package.There are 128 I/Os on the board.There are 256 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical component has a terminal position of 0.It is powered from a supply voltage of 3.3V.It belongs to the family [0].As a result, it is packaged as Tray.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.Ensure that the chip is mounted by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4A series.With 256pins programmed, the chip is ready to use.If you use this device, you will also find [0].The M4A3-256can be used to identify its related parts.A digital circuit is built using 10000gates.For high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.The electronic part is mounted by Surface Mount.There is a maximum supply voltage of 3.6Vwhen the device is operating.With a minimal supply voltage of [0], it operates.A total of 67programmable I/Os are available.83.3MHzis the maximum frequency.To detect input signals, there are 14 dedicated inputs.
M4A3-256/128-12FANI Features
256-BGA package
128 I/Os
The operating temperature of -40°C~85°C TA
256 pin count
M4A3-256/128-12FANI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-256/128-12FANI CPLDs applications.
- Complex programmable logic devices
- Power automation
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- LED Lighting systems
- PULSE WIDTH MODULATION (PWM)
- Digital multiplexers
- I2C BUS INTERFACE
- Timing control
- Software-driven hardware configuration
- Discrete logic functions
