M4A3-256/128-55YNC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-256 |
| Pin Count | 208 |
| JESD-30 Code | S-PQFP-G208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 128 |
| Memory Type | EEPROM |
| Propagation Delay | 5.5 ns |
| Number of Gates | 10000 |
| Max Frequency | 250MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5.5ns |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | ROHS3 Compliant |
M4A3-256/128-55YNC Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).In the 208-BFQFPpackage, you will find it.The device is programmed with 128 I/O ports.There are 208 terminations programmed into the device.QUADis the terminal position of this electrical part.There is 3.3V voltage supply for this device.This part is included in Programmable Logic Devices.It is packaged in the way of Tray.A reliable operation is ensured by the operating temperature of [0].Surface Mountshould be used for mounting the chip.In this case, it is a type of FPGA belonging to the ispMACH? 4A series.There are 208pins on the chip.If this device is used, you will also be able to find [0].The M4A3-256indicates that related parts can be found.A digital circuit is built using 10000gates.For high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.There is a maximum supply voltage of 3.6Vwhen the device is operating.A minimum supply voltage of 3V is required for it to operate.It is recommended that the maximum frequency be less than 250MHz.Input signals are detected by 14dedicated inputs.
M4A3-256/128-55YNC Features
208-BFQFP package
128 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
M4A3-256/128-55YNC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-256/128-55YNC CPLDs applications.
- Synchronous or asynchronous mode
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Code converters
- Power automation
- Battery operated portable devices
- Software Configuration of Add-In Boards
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Field programmable gate
- Bootloaders for FPGAs
- POWER-SAVING MODES
