M4A3-256/128-7YI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-256 |
| Pin Count | 208 |
| JESD-30 Code | S-PQFP-G208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 128 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 10000 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 97 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
M4A3-256/128-7YI Overview
In the mobile phone network, there are 256macro cells, which are cells with high-power antennas and towers.208-BFQFPis the package in which it resides.The device has 128inputs and outputs.The termination of a device is set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.Power is provided by a supply voltage of 3.3V volts.The part is included in Programmable Logic Devices.Trayshould be used to package the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.It belongs to the ispMACH? 4Aseries of FPGAs.It is programmed with 208 pins.The device can also be used to find [0].According to the M4A3-256, its related parts can be found.There are 10000 gates, which are devices that acts as a building block for digital circuits. It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.For data storage, EEPROMis adopted.It operates with the maximal supply voltage of 3.6V.Normally, it operates with a voltage of 3VV as its minimum supply voltage.There are a total of 97 Programmable I/Os.It is recommended that the maximal frequency be lower than 125MHz.The status of input signals is determined by 14dedicated inputs.
M4A3-256/128-7YI Features
208-BFQFP package
128 I/Os
The operating temperature of -40°C~85°C TA
208 pin count
M4A3-256/128-7YI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-256/128-7YI CPLDs applications.
- INTERRUPT SYSTEM
- PULSE WIDTH MODULATION (PWM)
- Cross-Matrix Switch
- Custom state machines
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Pattern recognition
- DDC INTERFACE
- Interface bridging
- Protection relays
- I/O expansion
