M4A3-256/128-7YNI
| Parameters | |
|---|---|
| Number of Macro Cells | 256 |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-256 |
| Pin Count | 208 |
| JESD-30 Code | S-PQFP-G208 |
| Qualification Status | Not Qualified |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 128 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 10000 |
| Max Frequency | 182MHz |
| Output Function | MACROCELL |
M4A3-256/128-7YNI Overview
The mobile phone network has 256 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).In the 208-BFQFPpackage, you will find it.The device is programmed with 128 I/O ports.It is programmed to terminate devices at [0].There is a QUADterminal position on the electrical part in question.A voltage of 3.3Vprovides power to the device.Trayis the packaging method.To ensure reliability, the device operates at a temperature of [0].It is recommended to mount the chip by Surface Mount.The ispMACH? 4Aseries FPGA is one of these types.With 208pins programmed, the chip is ready to use.According to the M4A3-256, its related parts can be found.In digital circuits, there are 10000gates, which act as a basic building block.It is recommended to store data in [0].A voltage of 3.6V is the maximum supply voltage for this device.Normally, it operates with a voltage of 3VV as its minimum supply voltage.It is recommended that the maximal frequency be lower than 182MHz.The input signals are detected by 14dedicated inputs.
M4A3-256/128-7YNI Features
208-BFQFP package
128 I/Os
The operating temperature of -40°C~85°C TA
208 pin count
M4A3-256/128-7YNI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-256/128-7YNI CPLDs applications.
- Handheld digital devices
- ON-CHIP OSCILLATOR CIRCUIT
- Software Configuration of Add-In Boards
- TIMERS/COUNTERS
- Software-Driven Hardware Configuration
- Preset swapping
- Software-driven hardware configuration
- ROM patching
- Synchronous or asynchronous mode
- Portable digital devices
