M4A3-32/32-10JI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-32 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 1250 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 145 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Height Seated (Max) | 4.572mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
M4A3-32/32-10JI Overview
There are 32 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The item is packaged with 44-LCC (J-Lead).It is programmed with 32 I/Os.There are 44 terminations programmed into the device.QUADis the terminal position of this electrical part.The power supply voltage is 3.3V.It belongs to the family [0].Trayshould be used for packaging the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Surface Mountshould be used for mounting the chip.As part of the ispMACH? 4Aseries, it is a type of FPGA.With 44pins programmed, the chip is ready to use.When using this device, YESis also available.The M4A3-32indicates that its related parts can be found.In digital circuits, 1250gates serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In this case, EEPROMwill be used to store the data.It operates with the maximal supply voltage of 3.6V.A minimum supply voltage of 3V is required for it to operate.There are a total of 145 Programmable I/Os.It is recommended not to exceed 100MHzin terms of frequency.
M4A3-32/32-10JI Features
44-LCC (J-Lead) package
32 I/Os
The operating temperature of -40°C~85°C TA
44 pin count
M4A3-32/32-10JI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-32/32-10JI CPLDs applications.
- D/T registers and latches
- INTERRUPT SYSTEM
- Power up sequencing
- Multiple Clock Source Selection
- Programmable power management
- ROM patching
- Address decoders
- Battery operated portable devices
- Field programmable gate
- Voltage level translation
