M4A3-32/32-10VNC48
| Parameters | |
|---|---|
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-32 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 1250 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 160 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
M4A3-32/32-10VNC48 Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is part of the 48-LQFP package.The device is programmed with 32 I/Os.It is programmed to terminate devices at [0].QUADis the terminal position of this electrical part.The power source is powered by 3.3Vvolts.There is a part in the family [0].Package the chip by Tray.A reliable operation is ensured by the operating temperature of [0].It is mounted in the way of Surface Mount.It is a type of FPGA belonging to the ispMACH? 4A series.It is programmed with 48 pins.Additionally, this device is capable of displaying [0].The M4A3-32contains its related parts.As a building block for digital circuits, there are 1250gates.In order to achieve high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.This electronic part is mounted in the way of Surface Mount.The device is designed with pins [0].This device operates at a voltage of 3.6Vas its maximum supply voltage.A minimum supply voltage of 3V is required for this device to operate.A programmable I/O count of 160 has been recorded.It is recommended that the maximum frequency be less than 100MHz.
M4A3-32/32-10VNC48 Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
48 pin count
48 pins
M4A3-32/32-10VNC48 Applications
There are a lot of Lattice Semiconductor Corporation M4A3-32/32-10VNC48 CPLDs applications.
- Protection relays
- Parity generators
- Cross-Matrix Switch
- I/O PORTS (MCU MODULE)
- LED Lighting systems
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Portable digital devices
- ON-CHIP OSCILLATOR CIRCUIT
- Bootloaders for FPGAs
- DMA control
