M4A3-32/32-10VNI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-32 |
| Pin Count | 44 |
| JESD-30 Code | S-PQFP-G44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 1250 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 224 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
M4A3-32/32-10VNI Overview
There are 32 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].There are 32 I/Os on the board.There are 44 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.An electrical supply voltage of 3.3V is used to power it.The part is included in Programmable Logic Devices.It is packaged in the way of Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended that Surface Mountholds the chip in place.The FPGA belongs to the ispMACH? 4A series.It is equipped with 44 pin count.If you use this device, you will also find [0].The M4A3-32contains its related parts.For digital circuits, there are 1250gates. These devices serve as building blocks.High efficiency requires a voltage supply of [0].For data storage, EEPROMis adopted.A voltage of 3.6V is the maximum supply voltage for this device.It is powered by 3Vas its minimum supply voltage.There are a total of 224 Programmable I/Os.Ideally, the maximal frequency should be lower than 100MHz Hz.
M4A3-32/32-10VNI Features
44-TQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
44 pin count
M4A3-32/32-10VNI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-32/32-10VNI CPLDs applications.
- Custom state machines
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Random logic replacement
- Storage Cards and Storage Racks
- Address decoding
- Programmable polarity
- Multiple Clock Source Selection
- STANDARD SERIAL INTERFACE UART
- Reset swapping
- Programmable power management
