M4A3-32/32-12VNI48
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-32 |
| Pin Count | 48 |
| JESD-30 Code | S-PQFP-G48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Number of Gates | 1250 |
| Max Frequency | 83.3MHz |
| Number of Programmable I/O | 145 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 12ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
M4A3-32/32-12VNI48 Overview
In the mobile phone network, there are 32macro cells, which are cells with high-power antennas and towers.The product is contained in a 48-LQFP package.As a result, it has 32 I/O ports programmed.It is programmed to terminate devices at [0].This electrical part has a terminal position of QUADand is connected to the ground.Power is provided by a supply voltage of 3.3V volts.The part belongs to Programmable Logic Devices family.Trayis the packaging method.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4A series.In this chip, the 48pins are programmed.The device can also be used to find [0].According to the M4A3-32, its related parts can be found.A digital circuit is built using 1250gates.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].A maximum voltage of 3.6Vis required for operation.Despite its minimal supply voltage of [0], it is capable of operating.There are 145 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It is recommended that the maximum frequency be less than 83.3MHz.
M4A3-32/32-12VNI48 Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
48 pin count
M4A3-32/32-12VNI48 Applications
There are a lot of Lattice Semiconductor Corporation M4A3-32/32-12VNI48 CPLDs applications.
- LED Lighting systems
- Complex programmable logic devices
- Digital designs
- Pattern recognition
- DMA control
- STANDARD SERIAL INTERFACE UART
- Parity generators
- State machine design
- Reset swapping
- ON-CHIP OSCILLATOR CIRCUIT
