M4A3-32/32-5JC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-32 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Gates | 1250 |
| Max Frequency | 167MHz |
| Number of Programmable I/O | 145 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 4.572mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
M4A3-32/32-5JC Overview
32 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.You can find it in package [0].There are 32 I/Os programmed in it.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part is wired with a terminal position of QUAD.The power source is powered by 3.3Vvolts.It is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.The operating temperature of the machine is 0°C~70°C TA to ensure its reliability.Ensure that the chip is mounted by Surface Mount.It belongs to the ispMACH? 4Aseries of FPGAs.It is programmed with 44 pins.It is also possible to find YESwhen using this device.There are related parts in [0].1250gates are used to construct digital circuits.High efficiency requires the supply voltage to be maintained at [0].For data storage, EEPROMis adopted.A maximum voltage of 3.6Vis required for operation.A minimum supply voltage of 3V is required for this device to operate.There are 145 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It should be below 167MHzat the maximal frequency.
M4A3-32/32-5JC Features
44-LCC (J-Lead) package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
M4A3-32/32-5JC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-32/32-5JC CPLDs applications.
- Programmable polarity
- Cross-Matrix Switch
- Software-Driven Hardware Configuration
- INTERRUPT SYSTEM
- Bootloaders for FPGAs
- DMA control
- Digital designs
- Interface bridging
- Address decoding
- Custom state machines
