M4A3-32/32-5VNC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-32 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Gates | 1250 |
| Max Frequency | 167MHz |
| Number of Programmable I/O | 97 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A3-32/32-5VNC Overview
Currently, there are 32 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The item is packaged with 44-TQFP.In this case, there are 32 I/Os programmed.There are 44 terminations programmed into the device.Its terminal position is QUAD.There is 3.3V voltage supply for this device.It is included in Programmable Logic Devices.Trayis the packaging method.Ensure its reliability by operating at [0].Ensure that the chip is mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4A series.It is equipped with 44 pin count.The device can also be used to find [0].According to the M4A3-32, its related parts can be found.The 1250gates serve as building blocks for digital circuits.High efficiency requires the supply voltage to be maintained at [0].Data is stored using [0].The electronic component is mounted by Surface Mount.The pins are [0].This device operates at a voltage of 3.6V when the maximum supply voltage is applied.The minimal supply voltage is 3V.In total, there are 97programmable I/Os.It is important to make sure that the maximum frequency is less than 167MHz.
M4A3-32/32-5VNC Features
44-TQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins
M4A3-32/32-5VNC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-32/32-5VNC CPLDs applications.
- Preset swapping
- Synchronous or asynchronous mode
- INTERRUPT SYSTEM
- Boolean function generators
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- PULSE WIDTH MODULATION (PWM)
- ON-CHIP OSCILLATOR CIRCUIT
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Parity generators
- Programmable polarity
