M4A3-32/32-5VNC48
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-32 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Gates | 1250 |
| Max Frequency | 167MHz |
| Number of Programmable I/O | 97 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
M4A3-32/32-5VNC48 Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).48-LQFPis the package in which it resides.It is equipped with 32I/O ports.48terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered from a supply voltage of 3.3V.This part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.It operates with the operating temperature of 0°C~70°C TA to ensure its reliability.It is mounted in the way of Surface Mount.As part of the ispMACH? 4Aseries, it is a type of FPGA.Chips are programmed with 48 pins.This device can also display [0].According to the M4A3-32, its related parts can be found.There are 1250 gates, which are devices that acts as a building block for digital circuits. If high efficiency is to be achieved, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.This electronic part is mounted in the way of Surface Mount.There are 48 pins embedded in the device.In this case, the maximum supply voltage is 3.6V.It operates with the minimal supply voltage of 3V.Currently, there are 97 Programmable I/Os available.It is important to make sure that the maximum frequency is less than 167MHz.
M4A3-32/32-5VNC48 Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
48 pin count
48 pins
M4A3-32/32-5VNC48 Applications
There are a lot of Lattice Semiconductor Corporation M4A3-32/32-5VNC48 CPLDs applications.
- Interface bridging
- Digital multiplexers
- DMA control
- Voltage level translation
- State machine control
- Digital systems
- PULSE WIDTH MODULATION (PWM)
- D/T registers and latches
- Protection relays
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
