M4A3-32/32-7JNC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-32 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 1250 |
| Max Frequency | 182MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 4.572mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | RoHS Compliant |
M4A3-32/32-7JNC Overview
In the mobile phone network, there are 32macro cells, which are cells with high-power antennas and towers.It is part of the 44-LCC (J-Lead) package.There are 32 I/Os programmed in it.The device is programmed with 44 terminations.There is a QUADterminal position on the electrical part in question.A voltage of 3.3V is used as the power supply for this device.The part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tube.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.The ispMACH? 4Aseries comprises this type of FPGA.In this chip, the 44pins are programmed.It is also possible to find YESwhen using this device.In accordance with the [0], its related parts are listed.It is possible to construct digital circuits using 1250gates, which are devices that serve as building blocks.In order to store data, EEPROMis used.In this case, Surface Mountis used to mount the electronic component.The device is designed with pins [0].It operates at a maximum supply voltage of 3.6V volts.The device is designed to operate with a minimal supply voltage of 3VV.It is recommended not to exceed 182MHzin terms of frequency.
M4A3-32/32-7JNC Features
44-LCC (J-Lead) package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins
M4A3-32/32-7JNC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-32/32-7JNC CPLDs applications.
- Programmable power management
- Multiple DIP Switch Replacement
- Preset swapping
- LED Lighting systems
- PULSE WIDTH MODULATION (PWM)
- Pattern recognition
- INTERRUPT SYSTEM
- Address decoding
- Multiple Clock Source Selection
- POWER-SAVING MODES
