M4A3-32/32-7VC48
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-32 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Gates | 1250 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 224 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
M4A3-32/32-7VC48 Overview
This network has 32macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).You can find it in package [0].There are 32 I/Os programmed in it.48terminations have been programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.It is powered from a supply voltage of 3.3V.The part belongs to Programmable Logic Devices family.Ideally, the chip should be packaged by Tray.Ensure its reliability by operating at [0].The chip should be mounted by Surface Mount.The ispMACH? 4Aseries comprises this type of FPGA.There are 48 pins on the chip.When using this device, YESis also available.According to the M4A3-32, its related parts can be found.In digital circuits, there are 1250gates, which act as a basic building block.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].The electronic part is mounted by Surface Mount.There are 48 pins on the device.A maximum voltage of 3.6Vis required for operation.In order for it to operate, a supply voltage of 3Vis required.A total of 224programmable I/Os are available.It is recommended that the maximum frequency be less than 125MHz.
M4A3-32/32-7VC48 Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
48 pin count
48 pins
M4A3-32/32-7VC48 Applications
There are a lot of Lattice Semiconductor Corporation M4A3-32/32-7VC48 CPLDs applications.
- DDC INTERFACE
- Code converters
- Custom state machines
- Digital multiplexers
- Battery operated portable devices
- Programmable power management
- ROM patching
- Software Configuration of Add-In Boards
- Power Meter SMPS
- POWER-SAVING MODES
