M4A3-32/32-7VNC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-32 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Gates | 1250 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 145 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A3-32/32-7VNC Overview
32 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is part of the 44-TQFP package.The device is programmed with 32 I/Os.The device is programmed with 44 terminations.The terminal position of this electrical component is QUAD.It is powered by a voltage of 3.3V volts.There is a part included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4A series.44pins are programmed on the chip.The device can also be used to find [0].According to the M4A3-32, its related parts can be found.A digital circuit can be constructed using 1250gates.High efficiency requires the supply voltage to be maintained at [0].Data is stored using [0].Surface Mountis the mounting point of this electronic part.The pins are [0].A maximum voltage of 3.6Vis required for operation.It operates with the minimal supply voltage of 3V.There are 145 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It is important to make sure that the maximum frequency is less than 125MHz.
M4A3-32/32-7VNC Features
44-TQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins
M4A3-32/32-7VNC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-32/32-7VNC CPLDs applications.
- Software-driven hardware configuration
- Software Configuration of Add-In Boards
- Code converters
- Parity generators
- Digital systems
- High speed graphics processing
- Complex programmable logic devices
- Wide Vin Industrial low power SMPS
- Auxiliary Power Supply Isolated and Non-isolated
- Boolean function generators
