M4A3-32/32-7VNC48
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-32 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Gates | 1250 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 145 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A3-32/32-7VNC48 Overview
32 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.In the 48-LQFPpackage, you will find it.The device is programmed with 32 I/O ports.There is a 48terminations set on devices.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.There is 3.3V voltage supply for this device.There is a part in the family [0].Trayshould be used for packaging the chip.Ensure its reliability by operating at [0].There should be a Surface Mounton the chip.As part of the ispMACH? 4Aseries, it is a type of FPGA.In this chip, the 48pins are programmed.If you use this device, you will also find [0].The M4A3-32indicates that related parts can be found.It is possible to construct digital circuits using 1250gates, which are devices that serve as building blocks.For high efficiency, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.In this case, it is mounted by Surface Mount.A total of 48pins are provided on this board.There is a maximum supply voltage of 3.6Vwhen the device is operating.The device is designed to operate with a minimal supply voltage of 3VV.A total of 145Programmable I/Os are present.It is recommended that the maximal frequency be lower than 125MHz.
M4A3-32/32-7VNC48 Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
48 pin count
48 pins
M4A3-32/32-7VNC48 Applications
There are a lot of Lattice Semiconductor Corporation M4A3-32/32-7VNC48 CPLDs applications.
- DMA control
- Battery operated portable devices
- Digital systems
- ROM patching
- TIMERS/COUNTERS
- Storage Cards and Storage Racks
- State machine control
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- USB Bus
- I/O expansion
