M4A3-32/32-7VNI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-32 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 1250 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 97 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
M4A3-32/32-7VNI Overview
In the mobile phone network, there are 32macro cells, which are cells with high-power antennas and towers.The product is contained in a 44-TQFP package.This device has 32 I/O ports programmed into it.The device is programmed with 44 terminations.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered from a supply voltage of 3.3V.It belongs to the family [0].Trayis the packaging method.It operates with the operating temperature of -40°C~85°C TA to ensure its reliability.Surface Mountshould be used for mounting the chip.The ispMACH? 4Aseries comprises this type of FPGA.It has 44pins programmed.This device also displays [0].The M4A3-32shows its related parts.It is possible to construct digital circuits using 1250gates, which are devices that serve as building blocks.Optimal efficiency requires a supply voltage of [0].In general, it is recommended to store data in [0].Surface Mountis used to mount this electronic component.It is designed with 44 pins.With a maximum supply voltage of [0], it operates.With a minimal supply voltage of [0], it operates.A programmable I/O count of 97 has been recorded.The maximal frequency should be lower than 125MHz.
M4A3-32/32-7VNI Features
44-TQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
44 pin count
44 pins
M4A3-32/32-7VNI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-32/32-7VNI CPLDs applications.
- Software-driven hardware configuration
- PLC analog input modules
- Synchronous or asynchronous mode
- Boolean function generators
- ROM patching
- Portable digital devices
- Wide Vin Industrial low power SMPS
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- PULSE WIDTH MODULATION (PWM)
- LED Lighting systems
