M4A3-384/192-10FANI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M4A3-384 |
| Pin Count | 256 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 192 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 15000 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 160 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
M4A3-384/192-10FANI Overview
There are 384 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).In the 256-BGApackage, you will find it.There are 192 I/Os on the board.The termination of a device is set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.Power is supplied by a voltage of 3.3V volts.It is included in Programmable Logic Devices.The chip should be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Mount the chip by Surface Mount.The FPGA belongs to the ispMACH? 4A series.With 256pins programmed, the chip is ready to use.This device is also capable of displaying [0].M4A3-384contains its related parts.In digital circuits, there are 15000gates, which act as a basic building block.If high efficiency is desired, the supply voltage should be kept at [0].Data storage is performed using [0].It operates at a maximum supply voltage of 3.6V volts.A minimum supply voltage of 3V is required for this device to operate.There are a total of 160 Programmable I/Os.It is important to make sure that the maximum frequency is less than 100MHz.
M4A3-384/192-10FANI Features
256-BGA package
192 I/Os
The operating temperature of -40°C~85°C TA
256 pin count
M4A3-384/192-10FANI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-384/192-10FANI CPLDs applications.
- Power automation
- Software-Driven Hardware Configuration
- I/O PORTS (MCU MODULE)
- Multiple Clock Source Selection
- PULSE WIDTH MODULATION (PWM)
- Digital designs
- Programmable power management
- Software Configuration of Add-In Boards
- Synchronous or asynchronous mode
- High speed graphics processing
