M4A3-384/192-12SAI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-384 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 192 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Number of Gates | 15000 |
| Max Frequency | 83.3MHz |
| Number of Programmable I/O | 224 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.7mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | Non-RoHS Compliant |
M4A3-384/192-12SAI Overview
There are 384 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.256-LBGAis the package in which it resides.This device has 192 I/O ports programmed into it.256terminations have been programmed into the device.There is a BOTTOMterminal position on the electrical part in question.A voltage of 3.3Vprovides power to the device.This part is in the family [0].It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].It is mounted in the way of Surface Mount.As part of the ispMACH? 4Aseries, it is a type of FPGA.A chip with 256pins is programmed.It is also characterized by YES.Its related parts can be found in the [0].15000gates are devices that serve as building blocks for digital circuits.A high level of efficiency can be achieved by maintaining the supply voltage at [0].It is recommended to store data in [0].This electronic part is mounted in the way of Surface Mount.The device is designed with pins [0].This device operates at a voltage of 3.6V when the maximum supply voltage is applied.A minimum supply voltage of 3V is required for it to operate.A total of 224 Programmable I/Os are available.It is recommended that the maximal frequency be lower than 83.3MHz.
M4A3-384/192-12SAI Features
256-LBGA package
192 I/Os
The operating temperature of -40°C~85°C TA
256 pin count
256 pins
M4A3-384/192-12SAI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-384/192-12SAI CPLDs applications.
- Storage Cards and Storage Racks
- Page register
- ROM patching
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- DMA control
- Custom state machines
- Interface bridging
- Handheld digital devices
- Programmable power management
- Cross-Matrix Switch
