banner_page

M4A3-384/192-65SAC

1.27mm PMIC ispMACH? 4A Series M4A3-384 256 Pin 3.3V 256-LBGA


  • Manufacturer: Lattice Semiconductor Corporation
  • Nocochips NO: 477-M4A3-384/192-65SAC
  • Package: 256-LBGA
  • Datasheet: PDF
  • Stock: 769
  • Description: 1.27mm PMIC ispMACH? 4A Series M4A3-384 256 Pin 3.3V 256-LBGA (Kg)

Details

Tags

Parameters
Operating Supply Voltage 3.3V
Programmable Type In System Programmable
Max Supply Voltage 3.6V
Min Supply Voltage 3V
Number of I/O 192
Memory Type EEPROM
Propagation Delay 6.5 ns
Number of Gates 15000
Max Frequency 143MHz
Number of Programmable I/O 224
Output Function MACROCELL
Number of Macro Cells 384
JTAG BST YES
Voltage Supply - Internal 3V~3.6V
Height Seated (Max) 1.7mm
Length 27mm
Width 27mm
RoHS Status Non-RoHS Compliant
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 256-LBGA
Number of Pins 256
Operating Temperature 0°C~70°C TA
Packaging Tray
Published 1998
Series ispMACH® 4A
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 256
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn63Pb37)
Additional Feature YES
HTS Code 8542.39.00.01
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position BOTTOM
Terminal Form BALL
Supply Voltage 3.3V
Terminal Pitch 1.27mm
Reach Compliance Code not_compliant
Base Part Number M4A3-384
Pin Count 256
Qualification Status Not Qualified

M4A3-384/192-65SAC Overview


There are 384 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the 256-LBGApackage, you will find it.In this case, there are 192 I/Os programmed.There are 256 terminations programmed into the device.This electrical part has a terminal position of BOTTOMand is connected to the ground.Power is provided by a supply voltage of 3.3V volts.The part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.The operating temperature of the machine is 0°C~70°C TA to ensure its reliability.Surface Mountshould be used for mounting the chip.It belongs to the ispMACH? 4Aseries of FPGAs.It is programmed with 256 pins.The device can also be used to find [0].M4A3-384contains its related parts.It is possible to construct digital circuits using 15000gates, which are devices that serve as building blocks.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.In general, it is recommended to store data in [0].Surface Mountmounts this electronic component.The 256pins are designed into the board.It operates at a maximum supply voltage of 3.6V volts.Despite its minimal supply voltage of [0], it is capable of operating.Programmable I/Os are counted up 224.There should be a lower maximum frequency than 143MHz.

M4A3-384/192-65SAC Features


256-LBGA package
192 I/Os
The operating temperature of 0°C~70°C TA
256 pin count
256 pins

M4A3-384/192-65SAC Applications


There are a lot of Lattice Semiconductor Corporation M4A3-384/192-65SAC CPLDs applications.

  • Power up sequencing
  • Timing control
  • D/T registers and latches
  • PULSE WIDTH MODULATION (PWM)
  • Preset swapping
  • Portable digital devices
  • Boolean function generators
  • Software-driven hardware configuration
  • Code converters
  • Protection relays

Write a review

Note: HTML is not translated!
    Bad           Good