M4A3-512/192-12FANI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M4A3-512 |
| Pin Count | 256 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 192 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Number of Gates | 20000 |
| Max Frequency | 83.3MHz |
| Number of Programmable I/O | 224 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 12ns |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
M4A3-512/192-12FANI Overview
The mobile phone network has 512 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).A 256-BGA package contains the item.As you can see, this device has 192 I/O ports programmed into it.There are 256 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.There is a BOTTOMterminal position on the electrical part in question.An electrical supply voltage of 3.3V is used to power it.This part is part of the family [0].It is recommended to package the chip by Tray.It operates with the operating temperature of -40°C~85°C TA to ensure its reliability.It is recommended that Surface Mountholds the chip in place.As part of the ispMACH? 4Aseries, it is a type of FPGA.It is equipped with 256 pin count.If you use this device, you will also find [0].You can find its related parts in the [0].There are 20000 gates, which are devices that acts as a building block for digital circuits. In order to maintain high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.A voltage of 3.6V is the maximum supply voltage for this device.It is powered by 3Vas its minimum supply voltage.A total of 224Programmable I/Os are present.It is recommended that the maximal frequency be lower than 83.3MHz.
M4A3-512/192-12FANI Features
256-BGA package
192 I/Os
The operating temperature of -40°C~85°C TA
256 pin count
M4A3-512/192-12FANI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-512/192-12FANI CPLDs applications.
- Digital multiplexers
- Dedicated input registers
- TIMERS/COUNTERS
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Software-Driven Hardware Configuration
- Digital systems
- PLC analog input modules
- Wide Vin Industrial low power SMPS
- Address decoders
- Field programmable gate
