M4A3-64/32-55VNC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-64 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 5.5 ns |
| Number of Gates | 2500 |
| Max Frequency | 167MHz |
| Number of Programmable I/O | 400 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A3-64/32-55VNC Overview
This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is enclosed in a 44-TQFP package.The device is programmed with 32 I/O ports.It is programmed that device terminations will be 44 .As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power source is powered by 3.3Vvolts.The part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.Surface Mountshould be used for mounting the chip.In this case, it is a type of FPGA belonging to the ispMACH? 4A series.It has 44pins programmed.If you use this device, you will also find [0].There are related parts in [0].As a building block for digital circuits, there are 2500gates.In order to achieve high efficiency, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].Surface Mountmounts this electronic component.The device has a pinout of [0].With a maximum supply voltage of [0], it operates.A minimum supply voltage of 3V is required for this device to operate.There are a total of 400 Programmable I/Os.It is recommended that the maximal frequency be lower than 167MHz.
M4A3-64/32-55VNC Features
44-TQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins
M4A3-64/32-55VNC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-64/32-55VNC CPLDs applications.
- Cross-Matrix Switch
- Storage Cards and Storage Racks
- Power automation
- Power up sequencing
- Configurable Addressing of I/O Boards
- ToR/Aggregation/Core Switch and Router
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- PULSE WIDTH MODULATION (PWM)
- Page register
- Programmable power management
