M4A3-64/64-10VNI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M4A3-64 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 2500 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 97 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A3-64/64-10VNI Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is part of the 100-LQFP package.The device is programmed with 64 I/Os.Terminations of devices are set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power source is powered by 3.3Vvolts.This part is part of the family [0].It is recommended to package the chip by Tray.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.Ensure that the chip is mounted by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4A series.The chip is programmed with 100 pins.When using this device, YESis also available.The M4A3-64indicates that related parts can be found.In digital circuits, 2500gates serve as building blocks.High efficiency requires a voltage supply of [0].In order to store data, EEPROMis used.The electronic part is mounted by Surface Mount.The 100pins are designed into the board.This device operates at a voltage of 3.6Vas its maximum supply voltage.The device is designed to operate with a minimal supply voltage of 3VV.A total of 97 Programmable I/Os are available.The maximum frequency should not exceed 100MHz.
M4A3-64/64-10VNI Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
100 pins
M4A3-64/64-10VNI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-64/64-10VNI CPLDs applications.
- Preset swapping
- I/O expansion
- Protection relays
- Software-driven hardware configuration
- White goods (Washing, Cold, Aircon ,...)
- Pattern recognition
- Software Configuration of Add-In Boards
- Auxiliary Power Supply Isolated and Non-isolated
- Multiple DIP Switch Replacement
- Boolean function generators
