M4A3-64/64-12VNI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M4A3-64 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 52.6MHz |
| Propagation Delay | 12 ns |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 12ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
M4A3-64/64-12VNI Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).A 100-LQFP package contains the item.It is equipped with 64I/O ports.100terminations have been programmed into the device.The terminal position of this electrical component is QUAD.A voltage of 3.3V is used as the power supply for this device.The part is included in Programmable Logic Devices.Trayshould be used for packaging the chip.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.Mount the chip by Surface Mount.In FPGA terms, it is a type of ispMACH? 4Aseries FPGA.100pins are programmed on the chip.This device can also display [0].The M4A3-64shows its related parts.In order for the device to operate, it requires 3.3V power supplies.3.6Vrepresents the maximal supply voltage (Vsup).The supply voltage (Vsup) should be greater than 3V.The clock frequency should not exceed 52.6MHz.
M4A3-64/64-12VNI Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
3.3V power supplies
M4A3-64/64-12VNI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-64/64-12VNI CPLDs applications.
- Multiple Clock Source Selection
- Preset swapping
- White goods (Washing, Cold, Aircon ,...)
- Digital multiplexers
- Code converters
- Wide Vin Industrial low power SMPS
- I/O expansion
- ROM patching
- Reset swapping
- Power Meter SMPS
