M4A3-64/64-7VNI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M4A3-64 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 2500 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 160 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A3-64/64-7VNI Overview
Currently, there are 64 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.You can find it in package [0].As a result, it has 64 I/O ports programmed.Terminations of devices are set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The device is powered by a voltage of 3.3V volts.It belongs to the family [0].As a result, it is packaged as Tray.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4A series.It is equipped with 100 pin count.This device also displays [0].The M4A3-64can be used to identify its related parts.A digital circuit can be constructed using 2500gates.A high level of efficiency can be achieved by maintaining the supply voltage at [0].It is recommended that data be stored in [0].There is a maximum supply voltage of 3.6Vwhen the device is operating.With a minimal supply voltage of [0], it operates.Programmable I/Os are counted up 160.The maximal frequency should be lower than 125MHz.
M4A3-64/64-7VNI Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
M4A3-64/64-7VNI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-64/64-7VNI CPLDs applications.
- Address decoders
- Dedicated input registers
- Custom state machines
- Storage Cards and Storage Racks
- Software Configuration of Add-In Boards
- State machine control
- ON-CHIP OSCILLATOR CIRCUIT
- I/O PORTS (MCU MODULE)
- Cross-Matrix Switch
- Power Meter SMPS
