M4A3-96/48-7VC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M4A3-96 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 48 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 3750 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 145 |
| Output Function | MACROCELL |
| Number of Macro Cells | 96 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
M4A3-96/48-7VC Overview
Currently, there are 96 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The item is enclosed in a 100-LQFP package.As you can see, this device has 48 I/O ports programmed into it.Devices are programmed with terminations of [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.An electrical supply voltage of 3.3V is used to power it.It is a part of family [0].Ideally, the chip should be packaged by Tray.During operation, the operating temperature is kept at 0°C~70°C TA to ensure its reliability.It is recommended to mount the chip by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4A series.If you use this device, you will also find [0].The M4A3-96indicates that related parts can be found.The 3750gates serve as building blocks for digital circuits.High efficiency requires a voltage supply of [0].It is recommended to store data in [0].A voltage of 3.6V is the maximum supply voltage for this device.Despite its minimal supply voltage of [0], it is capable of operating.There are 145 programmable I/Os in this system.It should be below 125MHzat the maximal frequency.There are 4 dedicated inputs used to detect the status of input signals.
M4A3-96/48-7VC Features
100-LQFP package
48 I/Os
The operating temperature of 0°C~70°C TA
M4A3-96/48-7VC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-96/48-7VC CPLDs applications.
- ROM patching
- Address decoders
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Storage Cards and Storage Racks
- Code converters
- I/O expansion
- Power automation
- Dedicated input registers
- Page register
- I2C BUS INTERFACE
