M4A5-128/64-10VNI
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M4A5-128 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 5000 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 97 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 256 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
M4A5-128/64-10VNI Overview
In the mobile phone network, there are 128macro cells, which are cells with high-power antennas and towers.100-LQFPis the package in which it resides.As a result, it has 64 I/O ports programmed.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.Power is supplied by a voltage of 5V volts.The part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Mount the chip by Surface Mount.As part of the ispMACH? 4Aseries, it is a type of FPGA.A chip with 100pins is programmed.If this device is used, you will also be able to find [0].The M4A5-128indicates that related parts can be found.A digital circuit is built using 5000gates.High efficiency requires the supply voltage to be maintained at [0].In general, it is recommended to store data in [0].The electronic component is mounted by Surface Mount.This board has 256 pins.With a maximum supply voltage of [0], it operates.The minimal supply voltage is 4.5V.This device runs on 5Vvolts of electricity.A total of 97 Programmable I/Os are available.It is recommended not to exceed 100MHzin terms of frequency.A total of 2dedicated inputs are available for the purpose of detecting input signals.
M4A5-128/64-10VNI Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
256 pins
5V power supplies
M4A5-128/64-10VNI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-128/64-10VNI CPLDs applications.
- Digital designs
- Page register
- PLC analog input modules
- Field programmable gate
- Software-Driven Hardware Configuration
- Software Configuration of Add-In Boards
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Wide Vin Industrial low power SMPS
- High speed graphics processing
- Cross-Matrix Switch
