M4A5-128/64-10YNC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M4A5-128 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 5000 |
| Max Frequency | 125MHz |
| Number of Logic Blocks (LABs) | 264 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 3.4mm |
| Length | 20mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-128/64-10YNC Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).A 100-BQFP package contains the item.It is equipped with 64I/O ports.Devices are programmed with terminations of [0].Its terminal position is QUAD.It is powered from a supply voltage of 5V.This part is in the family [0].It is packaged in the way of Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.It is recommended to mount the chip by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4A series.A chip with 100pins is programmed.It is also possible to find YESwhen using this device.According to the M4A5-128, its related parts can be found.5000gates are devices that serve as building blocks for digital circuits.High efficiency requires the supply voltage to be maintained at [0].For storing data, it is recommended to use [0].Surface Mountmounts this electronic component.The pins are [0].It operates at a maximum supply voltage of 5.25V volts.Despite its minimal supply voltage of [0], it is capable of operating.A power supply of 5Vis required to operate it.It is recommended that the maximal frequency be lower than 125MHz.The system consists of 264 logic blocks (LABs).There are 2 dedicated inputs used to detect the status of input signals.
M4A5-128/64-10YNC Features
100-BQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
5V power supplies
264 logic blocks (LABs)
M4A5-128/64-10YNC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-128/64-10YNC CPLDs applications.
- Reset swapping
- PULSE WIDTH MODULATION (PWM)
- Custom state machines
- Synchronous or asynchronous mode
- Digital multiplexers
- Power up sequencing
- POWER-SAVING MODES
- Boolean function generators
- Pattern recognition
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
