M4A5-128/64-12YNI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M4A5-128 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Number of Gates | 5000 |
| Max Frequency | 182MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 3.4mm |
| Length | 20mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-128/64-12YNI Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.You can find it in package [0].As you can see, this device has 64 I/O ports programmed into it.100terminations have been programmed into the device.QUADis the terminal position of this electrical part.Power is provided by a supply voltage of 5V volts.It belongs to the family [0].The chip should be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].Ensure that the chip is mounted by Surface Mount.The ispMACH? 4Aseries FPGA is one of these types.It has 100pins programmed.If you use this device, you will also find [0].The M4A5-128shows its related parts.As a building block for digital circuits, there are 5000gates.In order to maintain high efficiency, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.The electronic part is mounted by Surface Mount.The pins are [0].With a maximum supply voltage of [0], it operates.A minimum supply voltage of 4.5V is required for this device to operate.A total of 5V power supplies are needed to run it.The maximum frequency should not exceed 182MHz.The status of input signals is determined by 2dedicated inputs.
M4A5-128/64-12YNI Features
100-BQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
100 pins
5V power supplies
M4A5-128/64-12YNI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-128/64-12YNI CPLDs applications.
- State machine control
- Power Meter SMPS
- PULSE WIDTH MODULATION (PWM)
- Digital multiplexers
- DMA control
- Address decoding
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- DDC INTERFACE
- D/T registers and latches
