M4A5-128/64-7VC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Gates | 5000 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 97 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-128/64-7VC Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.A 100-LQFP package contains the item.In this case, there are 64 I/Os programmed.There are 100 terminations programmed into the device.There is a QUADterminal position on the electrical part in question.It is powered by a voltage of 5V volts.It is a part of family [0].Trayshould be used to package the chip.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.It is recommended that Surface Mountholds the chip in place.The ispMACH? 4Aseries comprises this type of FPGA.If you use this device, you will also find [0].The M4A5-128shows its related parts.The 5000gates serve as building blocks for digital circuits.In order to achieve high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.Surface Mountmounts this electronic component.There are 100 pins on the device.A voltage of 5.25V is the maximum supply voltage for this device.The device is designed to operate with a minimal supply voltage of 4.75VV.The system runs on a power supply of 5V watts.There are 97 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It is recommended that the maximal frequency be lower than 125MHz.A total of 2dedicated inputs are available for detecting the status of input signals.
M4A5-128/64-7VC Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pins
5V power supplies
M4A5-128/64-7VC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-128/64-7VC CPLDs applications.
- Multiple Clock Source Selection
- USB Bus
- Auxiliary Power Supply Isolated and Non-isolated
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Power Meter SMPS
- Cross-Matrix Switch
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Interface bridging
- TIMERS/COUNTERS
- Address decoding
