M4A5-128/64-7VNI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M4A5-128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 5000 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 900 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-128/64-7VNI Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).In the 100-LQFPpackage, you will find it.It is equipped with 64I/O ports.100terminations have been programmed into the device.This electrical component has a terminal position of 0.Power is provided by a supply voltage of 5V volts.It is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at [0].Ensure that the chip is mounted by Surface Mount.The ispMACH? 4Aseries comprises this type of FPGA.It is equipped with 100 pin count.If you use this device, you will also find [0].The M4A5-128shows its related parts.5000gates are devices that serve as building blocks for digital circuits.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].Surface Mountis used to mount this electronic component.It is designed with 100 pins.With a maximum supply voltage of [0], it operates.A minimum supply voltage of 4.5V is required for it to operate.There is 5V power supply available for it.Programmable I/Os are counted up 900.It is recommended that the maximal frequency be lower than 125MHz.Input signals are detected using 2dedicated inputs.
M4A5-128/64-7VNI Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
100 pins
5V power supplies
M4A5-128/64-7VNI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-128/64-7VNI CPLDs applications.
- Synchronous or asynchronous mode
- Random logic replacement
- Custom state machines
- Power up sequencing
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Storage Cards and Storage Racks
- Field programmable gate
- I/O expansion
- Configurable Addressing of I/O Boards
- Address decoding
