M4A5-128/64-7YC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Base Part Number | M4A5-128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 5000 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 680 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 3.4mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-128/64-7YC Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is embedded in the 100-BQFP package.The device is programmed with 64 I/Os.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.Power is supplied by a voltage of 5V volts.It is included in Programmable Logic Devices.Trayshould be used to package the chip.The operating temperature of the machine is 0°C~70°C TA to ensure its reliability.Surface Mountshould be used for mounting the chip.The ispMACH? 4Aseries comprises this type of FPGA.The chip is programmed with 100 pins.Additionally, this device is capable of displaying [0].The M4A5-128contains its related parts.The 5000gates serve as building blocks for digital circuits.Optimal efficiency requires a supply voltage of [0].Data storage is performed using [0].In this case, Surface Mountis used to mount the electronic component.The device has a pinout of [0].A voltage of 5.25V is the maximum supply voltage for this device.A minimum supply voltage of 4.75V is required for it to operate.In order for the device to operate, it requires 5V power supplies.A total of 680Programmable I/Os are present.It is recommended that the maximal frequency be lower than 125MHz.It has 2dedicated inputs for detecting input signals.
M4A5-128/64-7YC Features
100-BQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
5V power supplies
M4A5-128/64-7YC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-128/64-7YC CPLDs applications.
- PLC analog input modules
- Software Configuration of Add-In Boards
- STANDARD SERIAL INTERFACE UART
- Address decoding
- ON-CHIP OSCILLATOR CIRCUIT
- Configurable Addressing of I/O Boards
- POWER-SAVING MODES
- State machine design
- Timing control
- Auxiliary Power Supply Isolated and Non-isolated
