M4A5-128/64-7YI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-128 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Gates | 5000 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 900 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 3.4mm |
| Length | 20mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-128/64-7YI Overview
In the mobile phone network, there are 128macro cells, which are cells with high-power antennas and towers.The item is enclosed in a 100-BQFP package.In this case, there are 64 I/Os programmed.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of QUADand is connected to the ground.The power supply voltage is 5V.It is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Chips should be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4A series.In this chip, the 100pins are programmed.The device can also be used to find [0].In accordance with the [0], its related parts are listed.For digital circuits, there are 5000gates. These devices serve as building blocks.High efficiency requires the supply voltage to be maintained at [0].For storing data, it is recommended to use [0].Surface Mountis used to mount this electronic component.There are 100pins on it.This device operates at a voltage of 5.5V when the maximum supply voltage is applied.Normally, it operates with a voltage of 4.5VV as its minimum supply voltage.A power supply of 5Vis required to operate it.There are a total of 900 Programmable I/Os.It is recommended that the maximum frequency be less than 125MHz.There are 2 dedicated inputs used to detect the status of input signals.
M4A5-128/64-7YI Features
100-BQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
100 pins
5V power supplies
M4A5-128/64-7YI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-128/64-7YI CPLDs applications.
- Digital multiplexers
- Multiple DIP Switch Replacement
- Address decoding
- Complex programmable logic devices
- I/O PORTS (MCU MODULE)
- Digital designs
- Wide Vin Industrial low power SMPS
- USB Bus
- Discrete logic functions
- Synchronous or asynchronous mode
