M4A5-128/64-7YNC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M4A5-128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 5000 |
| Max Frequency | 182MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 3.4mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-128/64-7YNC Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The product is contained in a 100-BQFP package.There are 64 I/Os on the board.There are 100 terminations programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.A voltage of 5V is used as the power supply for this device.The part belongs to Programmable Logic Devices family.Trayis the packaging method.Due to its reliability, it is operated at a temperature of [0].Chips should be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4A series.It is programmed with 100 pins.This device can also display [0].The M4A5-128can be used to identify its related parts.A digital circuit is built using 5000gates.In this case, EEPROMwill be used to store the data.Surface Mountis the mounting point of this electronic part.There are 100 pins on the device.A maximum voltage of 5.25Vis required for operation.Despite its minimal supply voltage of [0], it is capable of operating.A power supply of 5Vis required to operate it.The maximal frequency should be lower than 182MHz.Input signals are detected using 2dedicated inputs.
M4A5-128/64-7YNC Features
100-BQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
5V power supplies
M4A5-128/64-7YNC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-128/64-7YNC CPLDs applications.
- Protection relays
- I/O expansion
- Digital multiplexers
- Software-driven hardware configuration
- I2C BUS INTERFACE
- DMA control
- Parity generators
- Power automation
- White goods (Washing, Cold, Aircon ,...)
- ON-CHIP OSCILLATOR CIRCUIT
