M4A5-192/96-12VNI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | M4A5-192 |
| Pin Count | 144 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 96 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Number of Gates | 7500 |
| Max Frequency | 83.3MHz |
| Number of Programmable I/O | 900 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 16 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-192/96-12VNI Overview
192macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.There is a 144-LQFP package containing it.There are 96 I/Os on the board.144terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The device is powered by a voltage of 5V volts.It belongs to the family [0].It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at [0].It is recommended that Surface Mountholds the chip in place.The ispMACH? 4Aseries FPGA is one of these types.There are 144pins on the chip.When using this device, YESis also available.You can find its related parts in the [0].In digital circuits, there are 7500gates, which act as a basic building block.Optimal efficiency requires a supply voltage of [0].It is recommended to store data in [0].Surface Mountis used to mount this electronic component.It is designed with 144 pins.A voltage of 5.5V is the maximum supply voltage for this device.It is powered by 4.5Vas its minimum supply voltage.There is 5V power supply available for it.There are 900 Programmable I/Os.Ideally, the maximal frequency should be lower than 83.3MHz Hz.The input signals are detected by 16dedicated inputs.
M4A5-192/96-12VNI Features
144-LQFP package
96 I/Os
The operating temperature of -40°C~85°C TA
144 pin count
144 pins
5V power supplies
M4A5-192/96-12VNI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-192/96-12VNI CPLDs applications.
- Field programmable gate
- Software Configuration of Add-In Boards
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- State machine design
- Multiple DIP Switch Replacement
- State machine control
- Software-driven hardware configuration
- Storage Cards and Storage Racks
- D/T registers and latches
- TIMERS/COUNTERS
