M4A5-192/96-6VNC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M4A5-192 |
| Pin Count | 144 |
| JESD-30 Code | S-PQFP-G144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 96 |
| Memory Type | EEPROM |
| Propagation Delay | 6 ns |
| Number of Gates | 7500 |
| Max Frequency | 143MHz |
| Number of Programmable I/O | 680 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 16 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 6ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-192/96-6VNC Overview
This network has 192macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).144-LQFPis the package in which it resides.The device is programmed with 96 I/O ports.144terminations are programmed into the device.This electrical component has a terminal position of 0.A voltage of 5V is used as the power supply for this device.This part is in the family [0].Trayshould be used for packaging the chip.It operates with the operating temperature of 0°C~70°C TA to ensure its reliability.It is recommended to mount the chip by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4A series.It is equipped with 144 pin count.The device can also be used to find [0].The M4A5-192can be used to identify its related parts.In digital circuits, there are 7500gates, which act as a basic building block.If high efficiency is desired, the supply voltage should be kept at [0].In this case, EEPROMwill be used to store the data.It operates at a maximum supply voltage of 5.25V volts.It is powered by 4.75Vas its minimum supply voltage.It runs on 5Vvolts of power.Programmable I/Os are counted up 680.It should be below 143MHzat the maximal frequency.Input signals are detected by 16dedicated inputs.
M4A5-192/96-6VNC Features
144-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
144 pin count
5V power supplies
M4A5-192/96-6VNC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-192/96-6VNC CPLDs applications.
- ROM patching
- Power automation
- Wide Vin Industrial low power SMPS
- Configurable Addressing of I/O Boards
- Random logic replacement
- Software-driven hardware configuration
- INTERRUPT SYSTEM
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- STANDARD SERIAL INTERFACE UART
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
