M4A5-192/96-7VI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-192 |
| Pin Count | 144 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 96 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 7500 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 900 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 16 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-192/96-7VI Overview
192macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is contained in package [0].As you can see, this device has 96 I/O ports programmed into it.Terminations of devices are set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power supply voltage is 5V.This part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].It is recommended that the chip be mounted by Surface Mount.This type of FPGA is a part of the ispMACH? 4A series.In this chip, the 144pins are programmed.When using this device, YESis also available.You can find its related parts in the [0].The 7500gates serve as building blocks for digital circuits.High efficiency requires a voltage supply of [0].In this case, EEPROMwill be used to store the data.The electronic component is mounted by Surface Mount.The pins are [0].This device operates at a voltage of 5.5V when the maximum supply voltage is applied.The device is designed to operate with a minimal supply voltage of 4.5VV.In order for the device to operate, it requires 5V power supplies.Programmable I/Os are counted up 900.There should be a lower maximum frequency than 125MHz.To detect the status of input signals, there are 16dedicated inputs.
M4A5-192/96-7VI Features
144-LQFP package
96 I/Os
The operating temperature of -40°C~85°C TA
144 pin count
144 pins
5V power supplies
M4A5-192/96-7VI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-192/96-7VI CPLDs applications.
- Digital systems
- Software Configuration of Add-In Boards
- Programmable polarity
- STANDARD SERIAL INTERFACE UART
- Bootloaders for FPGAs
- D/T registers and latches
- DDC INTERFACE
- Parity generators
- Reset swapping
- Voltage level translation
