M4A5-256/128-10YC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Number of Pins | 208 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | M4A5-256 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 128 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 10000 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 680 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height | 3.4mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-256/128-10YC Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The product is contained in a 208-BFQFP package.There are 128 I/Os on the board.There are 208 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.Power is supplied by a voltage of 5V volts.The part is included in Programmable Logic Devices.Trayshould be used to package the chip.Due to its reliability, it is operated at a temperature of [0].Ensure that the chip is mounted by Surface Mount.FPGAs belonging to the ispMACH? 4Aseries contain this type of chip.It is programmed with 208 pins.Additionally, this device is capable of displaying [0].In accordance with the [0], its related parts are listed.For digital circuits, there are 10000gates. These devices serve as building blocks.In order to achieve high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.In this case, Surface Mountis used to mount the electronic component.208pins are included in its design.A maximum voltage of 5.25Vis required for operation.A minimum supply voltage of 4.75V is required for it to operate.A power supply of 5Vvolts is required to operate this device.A total of 680Programmable I/Os are present.The maximal frequency should be lower than 100MHz.The status of input signals is detected by 14dedicated inputs.
M4A5-256/128-10YC Features
208-BFQFP package
128 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
208 pins
5V power supplies
M4A5-256/128-10YC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-256/128-10YC CPLDs applications.
- TIMERS/COUNTERS
- Configurable Addressing of I/O Boards
- ToR/Aggregation/Core Switch and Router
- Custom shift registers
- Programmable polarity
- Programmable power management
- Portable digital devices
- Multiple DIP Switch Replacement
- Boolean function generators
- Software-Driven Hardware Configuration
