M4A5-256/128-12YI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Number of Pins | 208 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M4A5-256 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 128 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Number of Gates | 10000 |
| Max Frequency | 83.3MHz |
| Number of Programmable I/O | 680 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-256/128-12YI Overview
This network has 256macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The product is contained in a 208-BFQFP package.There are 128 I/Os programmed in it.There are 208 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.An electrical supply voltage of 5V is used to power it.It is a part of the family [0].It is recommended that the chip be packaged by Tray.It operates with the operating temperature of -40°C~85°C TA to ensure its reliability.It is recommended to mount the chip by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4A series.Chips are programmed with 208 pins.This device also displays [0].According to the M4A5-256, its related parts can be found.In digital circuits, 10000gates serve as building blocks.High efficiency requires a voltage supply of [0].It is recommended that data be stored in [0].A Surface Mountis mounted on this electronic component.There are 208 pins embedded in the device.A voltage of 5.5V is the maximum supply voltage for this device.Initially, it requires a voltage of 4.5Vas the minimum supply voltage.There is 5V power supply available for it.There are 680 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. The maximal frequency should be lower than 83.3MHz.There are 14 dedicated inputs used to detect the status of input signals.
M4A5-256/128-12YI Features
208-BFQFP package
128 I/Os
The operating temperature of -40°C~85°C TA
208 pin count
208 pins
5V power supplies
M4A5-256/128-12YI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-256/128-12YI CPLDs applications.
- TIMERS/COUNTERS
- Auxiliary Power Supply Isolated and Non-isolated
- PLC analog input modules
- STANDARD SERIAL INTERFACE UART
- Multiple Clock Source Selection
- Cross-Matrix Switch
- POWER-SAVING MODES
- Code converters
- Software-driven hardware configuration
- Software Configuration of Add-In Boards
