M4A5-256/128-12YNI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Number of Pins | 208 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-256 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 128 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Number of Gates | 10000 |
| Max Frequency | 100MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-256/128-12YNI Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).In the 208-BFQFPpackage, you will find it.As a result, it has 128 I/O ports programmed.There are 208 terminations programmed into the device.There is a QUADterminal position on the electrical part in question.There is 5V voltage supply for this device.There is a part in the family [0].It is recommended that the chip be packaged by Tray.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.Surface Mountshould be used for mounting the chip.In this case, it is a type of FPGA belonging to the ispMACH? 4A series.208pins are programmed on the chip.This device is also capable of displaying [0].The M4A5-256can be used to identify its related parts.For digital circuits, there are 10000gates. These devices serve as building blocks.If high efficiency is desired, the supply voltage should be kept at [0].It is recommended to store data in [0].In this case, it is mounted by Surface Mount.208pins are included in its design.A maximum voltage of 5.5Vis required for operation.The device is designed to operate with a minimal supply voltage of 4.5VV.It runs on 5Vvolts of power.It is important to make sure that the maximum frequency is less than 100MHz.Input signals are detected by 14dedicated inputs.
M4A5-256/128-12YNI Features
208-BFQFP package
128 I/Os
The operating temperature of -40°C~85°C TA
208 pin count
208 pins
5V power supplies
M4A5-256/128-12YNI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-256/128-12YNI CPLDs applications.
- Field programmable gate
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Battery operated portable devices
- Pattern recognition
- Custom state machines
- Handheld digital devices
- Voltage level translation
- State machine control
- Address decoders
- Cross-Matrix Switch
